Mobile Home Roofing
If your looking for mobile home roofing near Tallahassee then your in the right spot.
We’ve spent decades estimating and installing roofs on mobile homes near Tallahassee FL. Mobile home roofs are unique because they are often lower in roof slope, have poor attic venting, and generally do not last long from the factory.
Material Choices
Your going to need to weigh the benefits of: initial cost, maintenance, and expected longevity. Choosing a material that is right for your mobile home really comes down to a few key questions:
- How much will it cost you now compared to other materials?
- How long will they each be expected to last?
- What sort of roof maintenance is involved with each material?
- Will it save me money on my utility expenses?
Mobile Home Roof Slope
Often times, mobile home roofs are fairly lower in roof pitch. Most commonly a 2/12 up to a 4/12 but many times they are below a 4/12 roof pitch. Perhaps this is to keep the building cost lower as compared to a conventional built home. Either way, one major consideration is that the roof pitch directly relates to how well (fast?) the rain drains off your home. Drop back and take a quick read on this article: “Shingles On A Low Slope” so your on the same page before we move on!
Mobile Home Roofing Costs
Roofing costs will vary depending on your area. This roofing cost chart should help you compare the basic costs between the most commonly used mobile home roofing:
| Roofing Material | Approx. Starting Price (per sq. ft.) | Approx. Current Price (per sq. ft.) | % Price Increase | Notes |
|---|---|---|---|---|
| 3-Tab Shingles | $3.50 – $4.00 | $3.50 – $4.00 | 0–10% | Basic asphalt shingle, rarely used now |
| Architectural Shingles | $3.25 – $4.00 | $3.75 – $5.00 | ~15–25% | Heavier, more dimensional shingle |
| Screw-Down Metal | $5.50 – $6.50 | $6.50 – $7.50 | ~15–25% | Economical metal with exposed fasteners |
| Standing Seam Metal | $8.00 – $10.00 | $10.00 – $12.00 | ~20–25% | Sleek design with hidden fasteners |
Roof Material Life Expectancy
Roofing costs will vary depending on your area. This roofing cost chart should help you compare the basic costs between the most commonly used mobile home roofing costs:
*3-tabs are almost becoming unavailable in some area’s. Because 3-tabs are just one layer thick, these are recommended for lower slope roof areas (2/12 – 4/12) instead of the double layer architectural shingles.
**Fasteners & soft flashings can be replaced to renew/extend the life.
| Roofing Material | Typical Lifespan (Years) | Notes |
|---|---|---|
| 3-Tab Shingles | 15 – 18 years | Most economical, but least durable. Vulnerable to wind and UV over time.* |
| Architectural Shingles | 18 – 25 years | More durable and layered than 3-tab. Better wind resistance and curb appeal. |
| Screw-Down Metal | 25 – 35 years | Good durability, but exposed fasteners can wear or loosen over time.** |
| Standing Seam Metal | 40 – 60+ years | Premium system with concealed fasteners. Minimal maintenance and excellent longevity. |
Mobile Home Roofing Maintenance
Roofing costs will vary depending on your area. This roofing cost chart should help you compare the basic installation costs between the most commonly used mobile home roofing options. They key to remember here is that accumulated debris on a lower pitched roof will lead to roof leaks!
| Roofing Material | Typical Lifespan (Years) | Maintenance Level | Typical Maintenance Needs |
|---|---|---|---|
| 3-Tab Shingles | 15 – 20 years | High | Check for curling, granule loss, and missing tabs. Often needs patching or early replacement. |
| Architectural Shingles | 25 – 30 years | Moderate | Inspect for storm damage, replace individual shingles as needed, clean off debris regularly. |
| Screw-Down Metal | 25 – 35 years | Moderate to High | Check and tighten exposed fasteners, reseal washers every 5–10 years, monitor for rust or panel lift. |
| Standing Seam Metal | 40 – 60+ years | Low | Minimal upkeep; inspect seams, flashing, and clean surface occasionally. Very durable with few issues. |
Attic Venting & Energy Savings
All roofing systems should have proper and effective attic venting. This ensures the roofing material is as cool as possible as well as keeping the attic temperature lower. Lower attic temps means less heat transfers into your living space. Be sure your mobile home attic area has adequate intake (soffit or eave vents) as well as properly matched exhaust (gable, ridge or off-the-ridge vents).
The best way to improve attic temperatures in your mobile home is to choose a light color shingle or energy star rated (painted) metal.
E-Rated Metal Roofing on a Mobile Home
